About Contact Classifieds Advertise Subscribe

Pacific Fishing Classifieds



F/V WESTERLY
1975 61' x 10' x 18' x 6' (6' headroom) combination, longliner, packer with 13.5 litre 6135 John Deere engine, manufactured by Centre Shipyard out of Vancouver, BC.
Top-producing 61' steel freezer combination. Proven landings for halibut, tuna, and black cod. Freezer capacity is 35 tons frozen – capable of freezing 600 tuna a day. Complete with lots of extra top-of-the-line equipment and gear for all the fisheries. Easily converted to pack on fisheries such as urchins, abalone, etc. Extended wheelhouse with gear dry lockers and full stand up fridge, accommodates easy outdoor wheelhouse for crew. Power: 13.5 liter 6135 John Deere engine; Twin Disc 514 reduction gear – rebuilt 2014; 5.16:1 ratio; 10 knots @ 1,865 RPM cruising speed; four-blade Osborne propeller; 3"-diameter stainless steel shaft; five steel fuel tanks (6,000-gallon capacity below deck); fuel transfer pump; engine alarm; engine fans; Keel cooling; genset #1: 45 kw John Deere 4045 (1,384 hours) with 4.2 cubic inch Eaton flow sensing hydraulic pump; genset #2: 50 kw four-cylinder Isuzu (14,721 hours) with flow sensing hydraulic pump; zinc saver isolates boat from dock power; blast freezer; two 15 hp electric freezer drives; two 05G Longstroke compressors – one new June 2008, one new 2011 (freezes 600 tuna per day); 2" Flomax stainless steel bilge pumps; 1" 1/4 Jabsco electric clutch on main; exhaust and wrapping are new as of 2016. Accommodations: sleeps four to five; electric stove; bar fridge (110 power) and two deep freezers; stainless steel galley sink; 500-gallon steel water tank; salt water converter; toilet; shower; six gallons hot water (110 electric); electric heating; five survival suits. Structural: steel decks and hull; aluminum frame safety glass windows in wheel house and Lexan storm windows; 2020 paint, zincs, and anti-fouling; foamed and glassed freezer holds; 35-ton capacity frozen fish, 50 tonnes fresh, large 40" flat back deck; anchor; Pilkington anchor winch with 26" anchor chain and 80 fathoms of 5/8 cable; longline drum with optional chute; Hyab winch with a lifting weight capacity of 4,000 lbs; two tuna puller gurdies; two life rafts; stabilizers. Electronics: Fleet One wifi system; sonar; GP32 and GPS navigator/Furuno VM; ICOM M601 VHF and Furuno FM 2510 VHF; Kenwood TKM 707 sideband (SSB); computer; Furuno 72 Mi PR7112 radar; Furuno color FCV 292 sounder and Plus Sonar Furuno 250 sounder; Nobletec Catch plotter program; 2001 comnav; spotlight; compass adjusted 2006; batteries new as of 2016; inverter; Kobalt controls; three electric steering stations; 12 volts for auxiliary; sodium lights. $500,000 USD. Serious inquiries only. Contact Leanne Wick:
(778) 679-0299 or leannewick@me.com.

HALIBUT AVAILABLE TO FISH 2024
4B around 17,000lbs + rollover from 2023. 4D around 39,000lbs + rollover from 2023.
B class IFQ. Call or text (360) 301-5947.
Email lalageyoder@gmail.com.


FOR SALE
F/V Pursuit for sale; owner retiring. Rigged for trolling albacore. Built by Jones-Goodell in Tacoma, WA. 60x17.2', blast refrigerant,
25-ton plate freezer. Includes Oregon salmon permit. Fished in both North and South Pacific. Carries excess of 7,500 gallons of diesel. Survey available. This rig is yacht-conversion worthy. Priced to sell at $325,000. Email fvpursuit@aol.com
with "Pursuit Sale" in subject line
or call (707) 407-7817.

FOR SALE
Brand new Isuzu UM6HK Marine Diesel engine and Twin Disc 5091 4:1 reduction gear with PTO. Still in crate, never run.
300 hp at 2,400 rpm. Izuzu extras: Walker AIRSEP, extra bolt on drive pulls for front
of crank shaft. Located in Craig, AK.
$60,000. Contact Matt Peavey of
F/V Anne Louise at (907) 401-0922.


FOR SALE
Beautiful lobster style MDI 45 foot boat located in Santa Barbara, CA. Boat is priced to sell at only $229,000. Boat is a great sea boat currently fishing offshore for black cod. Boat would make a great lite boat or lobster boat also. Call Don: (949) 279-9369.


FOR SALE
Purse seiner priced to sell. $329,000.
Call Don: (949) 279-9369.


F/V ANGIE
Unique Opportunity - Direct marketing, catcher/processor
Suitable for a small group of trollers,
gill netters, seiners, set netters, or use as
a floating lodge. Rigged additionally as factory troller with Alaska permit. Complete tender, processing and transport with current direct Salmon markets established for those who want to sell their fish for more money. Excellent for remote locations and small villages. Completely self contained, with
ice machine, water maker, blast freezing,
cold storage, vacuum packing and onboard fillet machine. Over 2 million invested,
come and inspect. Vessel and equipment excellent condition, available immediately.
(206) 369-2486.

WANTED
Looking to buy CA Spot Prawn permit.
Offer $500K. Call (213) 361-9553.

FOR SALE
Puget sound purse seine net, 285 fathoms long, seven strips deep. Half new web and some new lead line in 2019. $10k.
Call (206) 915-8345.


FOR SALE
Delta purse seiner, fully rigged, all squid permits and pelagic permits for California. Proven producer and has Oregon squid permit also. Owner retiring and willing to train new owner or captain for three months.
$2.3 million. Call Don: (949) 279-9369.


FOR SALE
65-foot charter boat – totally refurbished and set up for overnight tuna trips. Call Don:
(949) 279-9369. Priced to move: $679,000.


27' JC Commercial lobster boat
Cummins 6 BTA 370 HP (2016) cruise
14-15 6 GPH. 2 sleeping bunks.
Price: $75K. Call (213) 361-9553.


FOR SALE
Squid lite boat and brail boat for squid. Boat freshly hauled out ready to fish for upcoming season. Priced to sell at $399,000. Includes all equipment, boat, and California squid permit. Call Don: (949) 279-9369.


FOR SALE
Have a market light boat permit for sale for $329,000 and a 125 ton market purse seine permit for California for $1,799,999. Call Don: (949) 279-9369. La Niña coming means squid catches going up next year.

FOR SALE
Have two California lobster permits for sale; $130,000 today. Also looking for a Southern California rock crab permit; have buyer standing by. Call Don at (949) 279-9369.